Anycubic Water Wash Resin 2.0 Smoky Black

Water-washable UV resin | Compatible with 365405 nm MSLA/LCD printers | Smokey Black finish for detailed prints | Rinse clean with water no harsh solvents neededThe ANYCUBIC Water Wash Resin 2.0 Smoky Black is designed for MSLA/LCD resin printers and makers who want high-detail results without the hassle of solvent-based cleaning.

Its hydrophilic group-modified formulation means printed parts can be rinsed clean with plain water (5 minutes), cutting out the need for isopropyl alcohol in the wash stage. Compatible with 365405 nm UV light sources, it suits a wide range of consumer resin printers. Once washed, a 3-minute post-cure at 405 nm locks in the mechanical properties tensile strength of 3843 MPa and hardness of 8285 HD delivering finished parts that are firm, dimensionally stable, and transparent smoky black.

Best printed in an ambient temperature of 2040 C for consistent layer adhesion and reliable results.Features Water-washable formula rinse printed parts with water (5 min), no IPA required during washing Compatible with 365405 nm MSLA/LCD resin printers Smoky black transparency for display models, miniatures, and detail-focused prints Cured hardness of 8285 HD with tensile strength of 3843 MPa Low volume shrinkage rate of 2.25.5% for dimensionally accurate output Post-cure in 3 minutes at 405 nm UV (25,00030,000 W/cm) Post-cured resin disposable as standard plastic waste Specifications Colour: Smoky Black (#688197) Resin Size: 1kg Pre-print preparation: Shake well before use Print environment: 20-40 First layer exposure duration: 25-40 s Normal exposure duration: 2-2.5 s Print temperature: 20-50 Material: Hydrophilic group-modified light-curing resin Wavelength: 365-405 nm Viscosity: 190-230/mPas(25) Density: 1.07-1.09/g/cm Hardness: 82-85 HD Tensile Strength: 38-43 MPa Elongation at Break: 16-22% Bending Modulus: 48-60 MPa Bending Strength: 2300-3000 MPa Youngs Modulus: 1100-1300 MPa Izod Impact Strength: 133 J/m Volume Shrinkage Rate: 2.2-5.5% Cleaning: 95% IPA Washing duration: 3 mins UV Wavelength: 405 nm Curing Temperature: 18-30 UV Intensity: 25000-30000 uW/cm Curing time: 3 mins Disposal: Post-UV-curing resin is treated as plastic waste Cleaning: Water Washing duration: Medium 5 min UV Wavelength: 405 nm Curing Temperature: 18-30 UV Intensity: 25000-30000 uW/cm Curing time: 3 mins Disposal: 1.

Do not drain wastewater into sewers to avoid contaminating groundwater. 2. After cleaning, let the wastewater sit in the tank for a period of time. 3. Place it under sunlight to allow the resin in the tank to fully cure. 4. Once cured, dispose of it as solid plastic waste for recycling to prevent environmental pollution.

Whats in the Box Anycubic Water Wash Resin 2.0 Smoky Black x1