Network Cable Ethernet Tester Lan CAT5 CAT6 Tracker

Features

Description

Advanced Network Cable Tracker Tone Generator and Probe Kit with Cable Testing Capabilities like Wiremap, Length, PoE Network Cable Ethernet Tester With PoE NCV Multi-Function Line Tracker LAN CAT5 CAT6 Tracker LCD Display Measure Length Wiremap Tester 3 Cable Tracing Modes - Digital, Analog, and PoE.

In digital or analogue mode, the tone generator sends strong, clear toning to let you find cables faster. If the cable you need to identify is plugged into a PoE switch, the PoE scan mode will make the cable tracing more precise. The NF-8209 allows you to do wire map testing and check 5 common connection problems including open, short, cross, split, and reversed pairs, measure the length of LAN cables with a range of 2.5m - 500m, test the info of PoE devices such as PoE voltage, power supply polarity and mode, type of PSE (AF or AT standard).

Port Flash & Switch Details Test. The port flash feature enables you to locate network ports by flashing port lights on switches or routers and will tell you the connected switchs info like its speed, transmitting mode, and protocol. 128x64 Dots Graphic LCD Display. The NF-8209 cable tracker comes with a bright and easily discernible LCD display making it much easier to use.

Any cable issues can be easily identified and tracked just by looking at the visual and well-lit tester display. Multi-Function Continuity test, cable fault test, PoE test, port flash, Rj45 cable tester, CAT5e/CAT6/CAT6a PoE test and hub blink Identify which pins are being powered, detect PoE voltage, current, power, and the ability to identify PSE type (at/af standard).

Locate network ports by blinking port lights on Hub/Switch, which can be used for 10M/100M/1000M hubs/switches Measure fault distance? tdr nf-8209 to LAN cable fault distance for accurate positioning. Accurate measurement of cable length, the range of 200 meters, is a professional cabling engineer and finder home repair necessary tools Cable pass-through test & NCV Equipped with headphones, easy to carry, with anti-interference hunting mode, can be matched with the remote control to implement 1V1 line, can test the shielded network cable hub flicker and NCV function, test the physical state of STP and UTP network cable.

Detect the presence of AC voltage (50V-1000V) Non-contact Voltage (NCV) Detecting. The receiver (the tone probe) can be used to detect AC voltage presence. Technical Index Transmitter: Wiremap Cable type CAT5?CAT6 (STP & UTP) Test with a switch directly Yes Max range 600m Length Cable type CAT5?CAT6 (STP & UTP) Test range 2~200m Accuracy 1.6m Breakage location Yes Scan Cable type CAT5?CAT6 (STP & UTP) Max. signal voltage 8Vp-p Frequency 130KHz AC filter Yes Max range 600m POE Test range DC 5~60V standard/non-standard PoE switch Voltage display Yes PoE type IEEE 802.3af/at LCD display 12864 Dot-matrix with backlight Power supply AAA3 (Not included) Low battery warning 2.7V Auto-off time 15min?30min?60min?OFF Voltage protection DC48V 5mA Max working current Receiver: Sensitivity adjustable Yes AC Voltage detecting Yes Lamp Yes Battery type 9Vx1 (Not included) Low battery warning 6 0.5V Max working current Remote: Wiremap Port RJ45 Voltage protection DC48V 5mA What's in the box 1 x Emitter 1 x Receiver 1 x Remote 1 x Wired Headphones 1 x Cable Adapters 1 x Carry Bag 1 x User Manual