Tork Craft Rotary Burr Tungsten 6X16X6MM Conical

Features

Description

Rotary burr tungsten Rotary burr to be used with pneumatic air tools and electric die grinders. SHAPE: Conical
SHANK: Ø6mm
DIA: *6mm
CUTTING LENGTH: 16mm
METAL: Tungsten carbide
CUT: Double cut

Application:

A tungsten carbide burr can be used for:

• Cleaning welding seams
• Deburring
• Grinding
• Shaping

  The speed at which you use your tungsten carbide burr in your rotary tool will depend on the material youre using it on and the contour being drilled.

Its safe to say - do not need to exceed 35,000 rpm.

The benefits of tungsten carbide burrs:

Tungsten carbide burrs can be used on many materials:

• All metals
• Stone
• Ceramic
• Porcelain
• Hard wood
• Reinforced plastics

Tungsten carbide burrs are much harder than HSS (High Speed Steel) burrs and are used to cut harder materials.

The burrs wear less and retain their hardness under higher temperatures. If the burrs are chipping, this could be due to the speed being too slow. It is ideal to start the burr off slow, increasing the speed as you go along. High speeds will prevent clogging in the flutes of your burrs. When using burrs, always try to keep the burr on the move.

This will prevent the burr from jabbing and digging into your material causing roughness.
As with all drill bits and burrs, let the burr do the work and apply little pressure otherwise the cutting edges of the flutes will chip, reducing the life of the burr.