Description
This is a product description for a Masonry Drill Bit. The bit is 12mm in diameter and 400mm long. It has a TCT (tungsten carbide tipped) point, which is designed to drill holes in Masonry. The bit is for use with a percussion drill with a 3 jaw chuck, and should be preset to achieve the correct depth before drilling. It is important to note that the bit should not be used with a rotary hammer, as the impact energy will break the conversion chuck.
Drill bit for Masonry
Drill diameter: Ø12.0mm
Length: 400mm
Drill bit: TCT (Tungsten carbide tipped)
Application:
The drill bit is used to drill holes in
masonry, thanks to the uniquely designed TCT (tungsten carbide tipped) point. A percussion (hammer action) drill with a 3 jaw chuck is required. Preset the depth gauge on the drill to achieve the correct depth before drilling into walls.
TIP: Have a wall scanner (detector) ready before drilling into walls.
CAUTION: Do not use the drill bit with a rotary hammer. The impact energy will break the conversion chuck.
Related Products
