Anycubic Pla Silk Dual Filament 1KG - BLACK PURPLE-AHSC10-10

Dual-colour gradient silk finish | Smooth, high-lustre surface | Compatible with 1.75 mm FDM printers | Printable at 50250 mm/s | Intelligent identification supportedThe Anycubic PLA Silk Dual Filament in Black/Purple is designed for makers, artists, and hobbyists who want their prints to do more than just hold a shape.

The dual-colour gradient construction blends deep black and rich purple into a seamlessly shifting, silk-like finish that catches the light differently from every angle ideal for decorative parts, fan art, figurines, and display pieces. By adjusting nozzle temperature and print speed within the recommended 210240 C and 50250 mm/s ranges, you can dial the surface gloss up or down to suit the look you're after.

The filament supports intelligent identification when paired with compatible Anycubic printers, streamlining setup automatically. For best results, dry the filament at 5565 C for 68 hours before printing, and use a nozzle of 0.4 mm or larger. A reliable, visually striking material for FDM prints that deserve a premium finish.Features Dual-colour gradient blends black and purple for a rich, layered visual effect Silk-like lustre that shifts with viewing angle, giving prints a premium aesthetic Adjustable surface gloss tune temperature and speed to control sheen level Compatible with all 1.75 mm FDM printers; no special hardware required Supports intelligent identification on compatible Anycubic printers for seamless setup Recommended for decorative parts, fan art, figurines, and display models Certified to RoHS, REACH, and SDS standards Specifications Colour: Black Purple (#212721,#7249C7) Dry Out Before Use: Recommended Drying Condition: 55-65, 6-8h ACE Compatibility: Compatible Nozzle Size: Recommended 0.4 mm or above Printing Temperature: 210-240 Heated Bed Temperature: 55-56 Recommended Printing Speed: 50-250 mm/s Maximum Volume Speed (Flow Rate): 8 mm/s Density: 1.22 g/cm Melt Index: 91 g/10 min (190/2.16kg) Melting Point Temperature: 164 Vicat Softening Temperature: 54 Heat Deflection Temperature (0.45MPa): 53 Young's Modulus: 2000200 MPa Tensile Strength: 374 MPa Elongation at Break: 285% Bending Modulus: 2400160 MPa Bending Strength: 664 MPa lzod lmpact Strength (X-Y): 202 kJ/m Tensile Strength (Z): 124 MPa Filament Type: Aesthetic filaments Recommend to Print: Decorative parts, fandom, artworks Intelligent Identification: Supported Reusable Filament Spool: Supported Size: 1KG What's in the Box Anycubic PLA Silk Dual Filament 1kg - Black/Purple x1