Anycubic Pla Silk Dual Filament 1KG - PINK GOLD-AHSC11-10

Silk-lustre dual-colour PLA filament | Gradient pink and gold finish | Adjustable gloss via print settings | Compatible with 0.4 mm nozzles and above | Suitable for decorative prints and artistic modelsThe Anycubic PLA Silk Dual Filament in Pink/Gold is designed for makers who want their prints to stand out with a rich, multi-tonal finish.

The dual-colour silk formulation blends pink and gold tones into a gradient effect that shifts as the model is rotated, lending finished pieces a premium, layered appearance suited to decorative parts, fan art, and artistic projects. You can fine-tune the surface gloss by adjusting nozzle temperature and print speed a higher temperature or slower speed increases filament fluidity, producing a smoother, higher-gloss result.

The filament prints at 210240 C with a heated bed set to 5556 C and accommodates speeds of 50250 mm/s, giving you the flexibility to balance quality and throughput. Use a 0.4 mm nozzle or larger for best results, and dry the filament at 5565 C for 68 hours before use to ensure consistent extrusion.Features Dual-colour Pink/Gold silk finish creates a gradient, multi-tonal effect that shifts with viewing angle Adjustable luster increase nozzle temperature or reduce print speed for a higher-gloss, silky surface Printing temperature range of 210240 C suits a wide variety of FDM printers with a 0.4 mm or larger nozzle Recommended print speed of 50250 mm/s for flexible throughput without sacrificing surface quality Heated bed temperature of 5556 C for reliable first-layer adhesion Dry before use at 5565 C for 68 hours to maintain filament integrity and consistent flow Complies with RoHS, REACH, and SDS certifications Specifications Colour: Pink Gold (#F67599,#F2A900) Dry Out Before Use: Recommended Drying Condition: 55-65, 6-8h ACE Compatibility: Compatible Nozzle Size: Recommended 0.4 mm or above Printing Temperature: 210-240 Heated Bed Temperature: 55-56 Recommended Printing Speed: 50-250 mm/s Maximum Volume Speed (Flow Rate): 8 mm/s Density: 1.22 g/cm Melt Index: 91 g/10 min (190/2.16kg) Melting Point Temperature: 164 Vicat Softening Temperature: 54 Heat Deflection Temperature (0.45MPa): 53 Young's Modulus: 2000200 MPa Tensile Strength: 374 MPa Elongation at Break: 285% Bending Modulus: 2400160 MPa Bending Strength: 664 MPa lzod lmpact Strength (X-Y): 202 kJ/m Tensile Strength (Z): 124 MPa Filament Type: Aesthetic filaments Recommend to Print: Decorative parts, fandom, artworks Intelligent Identification: Supported Reusable Filament Spool: Supported Size: 1KG What's in the Box Anycubic PLA Silk Dual Filament 1kg - Pink/Gold x1