Anycubic Pla Silk Tri-colour Filament 1KG BLUE GREEN PURPLE-AHSC14-10

Tri-colour silk gradient in blue, green & purple | Adjustable gloss finish | Flexible and reliable printing | Compatible with 1.75 mm printers | Ideal for decorative prints and artworkThe Anycubic PLA Silk Tri-colour Filament in Blue/Green/Purple is designed for makers who want their prints to go beyond the ordinary.

This 1 kg spool combines three complementary colours blue, green, and purple into a single filament that produces natural gradient transitions and a lustrous, silk-like surface finish as the print builds layer by layer. By adjusting nozzle temperature and print speed within the recommended range of 210240 C and 50250 mm/s, you can dial the surface sheen from a subtle satin to a high-gloss finish, giving you direct control over how the final model looks.

The filament has passed extensive bending and tearing tests, delivering the flexibility needed for smooth, uninterrupted runs making it a reliable choice for decorative parts, fan art, and artistic models. Compatible with any 1.75 mm filament printer using a 0.4 mm or larger nozzle, it slots into your existing workflow without fuss.Features Tri-colour gradient (blue, green, purple) produces rich, layered colour transitions across the printed surface Silk-like luster shifts with viewing angle, giving finished models a premium, eye-catching finish Controllable gloss raise nozzle temperature or lower print speed to increase surface smoothness and shine Printing temperature range of 210240 C and recommended speed of 50250 mm/s suits a wide range of FDM printers Compatible with any 1.75 mm filament printer fitted with a 0.4 mm or larger nozzle Proven flexibility through extensive bending and tearing tests for reliable, uninterrupted printing Complies with RoHS, REACH, and SDS certifications Specifications Colour: Blue Green Purple (#003594,#006F44,#452B6F) Dry Out Before Use: Recommended Drying Condition: 55-65, 6-8h ACE Compatibility: Compatible Nozzle Size: Recommended 0.4 mm or above Printing Temperature: 210-240 Heated Bed Temperature: 55-56 Recommended Printing Speed: 50-250 mm/s Maximum Volume Speed (Flow Rate): 8 mm/s Density: 1.22 g/cm Melt Index: 91 g/10 min (190/2.16kg) Melting Point Temperature: 164 Vicat Softening Temperature: 54 Heat Deflection Temperature (0.45MPa): 53 Youngs Modulus: 2000200 MPa Tensile Strength: 374 MPa Elongation at Break: 285% Bending Modulus: 2400160 MPa Bending Strength: 664 MPa lzod lmpact Strength (X-Y): 202 kJ/m Tensile Strength (Z): 124 MPa Filament Type: Aesthetic filaments Recommend to Print: Decorative parts, fandom, artworks Intelligent Identification: Supported Reusable Filament Spool: Supported Size: 1KG What's in the Box Anycubic PLA Silk Tri-colour Filament 1kg Blue/Green/Purple x1