Description
This is a product description for a 4 flute wood boring bit. The bit has a diameter of 10.0mm, an overall length of 400mm, and a Shank diameter of 6.35mm. The bit is designed for use with a low rpm rotary drill with a planetary gearbox. It is possible to use a cordless drill, but in its lowest gear. The bit has 4 cutting edges that leaves a cleaner and more precise bored hole. The edges of the bit have been hardened and remains sharper for longer. The bit has flutes designed to have excellent chip/shaving clearance.
4 flute wood boring bit
Diameter: Ø10.0mm
Overall length: 400mm
Shank: 6.35mm hex for quick change
Application:
Use the 4 flute boring bit to drill into wood/timber. A low rpm rotary drill with a planetary gearbox is required to be used with boring bits. It is possible to use a cordless drill, but in its lowest gear.
Benefits:
- The drill spurs have 4 cutting edges that leaves a cleaner and more precise bored hole.
- Using the same designed screw tip as from an auger drill bit - the 4 flute boring bit feeds itself.
- The shank can be clamped into a 6.35mm quick change chuck or a standard 3 jaw chuck. It also prevents slipping in a chuck.
- The edges of the bit have been hardened and remains sharper for longer.
- The flutes are designed to have excellent chip/shaving clearance.
- 4 cutting edges means faster cutting and more durability.
CAUTION: Take care when drilling with wood boring bits. Keep the rotary drill steady with both hands to prevent wrist injury.
Related Products
