FS-100E Battery Operated Ultraviolet Flame Sensor With Built-in Sounder

The Takex FS-100E Battery Operated Ultraviolet Flame Sensor With Built-in Sounder is a high sensitivity ultraviolet flame sensor, designed to quickly detect ultraviolet rays contained in flames and activates a built-in alarm sound plus an open collector output. The flame sensor can be operated for approximately 2 years with good quality type-AA alkaline batteries.

Due to the easy separation of the sensor unit and the base unit it is very easy to install and maintain. Please note: It does not detect smoke or heat. It is not a re-preventing device. Product Code: FS-1000E FEATURES OF THE HIGH SENSITIVITY UV FLAME SENSOR: High sensitivity ultraviolet flame sensor Detachable base unit with snap-in-out sensor design Built-in sounder NO/NC relay output Adjustable response time Battery (2 x AA type-3 alkaline) or DC operation SPECIFICATIONS OF THE HIGH SENSITIVITY UV FLAME SENSOR: Detection system Ultraviolet rays detection (Detected wave length 180~260nm) Coverage Distance - 10m (7cm lighter flame, in front) Angle - Approx. 120 conically Supply voltage Type-AA alkaline battery (LR6) 2pcs / DC3V External wiring DC9 30V (Polarized) Current consumption Stand by - 50A Max. when battery power supply, 5mA Max. when external power supply Alarm - 50mA Max. when buzzer sounds Alarm output NPN open collector output (Useful as an output with voltage when external power is used) 30V (DC) 50mA, off-delay 10sec. continuous output LED indicator Red LED LED Alarm - Flashing every 0.2sec. during off-delay approx. 10sec.

Low battery - Light on 0.1sec. every approx. 5sec. Buzzer Alarm - Sounds intermittently every 0.2sec. during off-delay 10sec. Low battery - Sound 0.1sec. intermittently every approx. 5sec. Volume - 80dB or more 1m ahead (Silent setting is available by cutting internal jumper line) Sensitivity adjustment Detection sensitivity (H [100%], L [50%]) Detection timer (1sec., 6sec., 15sec., 30sec.,) Mounting position Indoor (Ceiling or wall mount) Wiring Terminals Appearance ABS resin (white) Ambient temperature -10C to +60C without condensation Battery performance may decrease under 0C or beyond +40C Product Dimensions 120 mm (L) x 120 mm (W) x 45 mm (H) Product Weight excluding battery 152g Packaging Dimensions 187 mm (L) x 175 mm (W) x 67 mm (H) Mass of unit packed 330g Warranty 12 months limited Manufacturers warranty Warnings and Limitations of the High Sensitivity UV Flame Sensor:1.

All installations must be done by a suitable qualified technician2. Under no circumstances may any of the components be modified. WHATS IN THE BOX:1 x Takex FS-1000E UV Flame Sensor with built-in sounder Limitations:The images shown are for illustrative purposes only. Actual product may vary slightly.