Description
Crest Gloss Enamel is a high-quality enamel paint suitable for both interior and exterior surfaces. It is ideal for use on cement plaster, fibreboard, ceiling board, gypsum plaster, metal, and wood. The paint dries to a hard, glossy finish that is scratch and stain resistant, as well as UV resistant. It is water-based and has a spreading rate of 59m/ depending on the application. The practical spreading rate may vary depending on the substrate and application technique. The paint is nonflammable and can be applied with a brush or roller. It is not recommended to thin the paint and can be cleaned with water. It dries in 1 hour and can be recoated after 4 hours.
CREST GLOSS ENAMEL is a premium quality interior or exterior enamel for surfaces where a glossy durable finish is required. INTENDED USES - For application to suitably primed new and old cement plaster walls, fibreboard, ceiling board, gypsum plaster, ceiling boards metal and wood. Ideal for trimming. Dries to a hardwearing high gloss finish, Ultratough, Scratch and stain resistant, High opacity, Durable, Fully washable, UV resistant, Interior and Exterior. Type: Waterbased Acrylic, Spreading rate: 59m/ depending on application, Practical spreading rate The practical spreading rate will vary depending on the porosity and profile of the substrate, as well as the application technique and tools used, S G at 23C: Approx.: 1,45, Flash point: Nonflammable, Method: Brush or roller, Thinning: Not recommended, Cleaning: Water, Touch Dry: 1 hour, Recoating Time: 4 hours (2 coats required)