Description
This HDMI extender is used to extend the HDMI signal up to 150m. It supports resolutions up to 1920x1080P@60Hz and supports TCP/IP protocol for one-to-many and many-to-many applications with POE switches. It also supports independent Stereo Audio over IP, separate from HDMI extension support.
Receiver only unit to use with aGW-A-PW-DT241M Kit -DT241M KIT
The H.264 HDMI extender adopts standard Ethernet TCP/IP protocol, receives HD video and audio over single cat6 cable, and support One-to-many applications with POE switches. The equipment has excellent image processing and transmission capacity, makes signal transmission more smooth and steady, is a kind of economic and efficient way of HDMI signal extension.
Features
- Receives HDMI video and audio signals up to 150m using a single CAT6 cable.- Supports video resolution up to 1920*1080P@60Hz.- Supports TCP/IP protocol for one-to-many and many-to-many applications with POE switches.- Allows USB (Keyboard, Mouse) extension over IP.- Compliance with HDMI 1.3 and HDCP 1.2 standards.- High compatibility, automatically matches the source and display device.- Built-in automatic adjustment system ensures smooth, clear, and stable images.- Simple installation, plug and play.
Specifications
- HDMI Version: HDMI 1.3- HDCP Version: HDCP 1.2- Resolution: 1920x1080P@60Hz
Video
- Standards: HDMI 1.3; HDCP 1.2- Compressed format: H.264- Maximum pixel clock: 165MHz- Maximum data rate: 6.75Gbps- Resolution:1920X1080P@60Hz- Connector: HDMI-A- Impedance: 100
IR
- Interface: 3.5mm earphone seat- Signal direction: Unidirectional- Signal type: Digital- IR frequency: 20-60kHz
UTP
- Interface: RJ45- Transmission distance: CAT6 - 150m, CAT5E - 150mOther
- Power supply: The power adapter: DC 12V, POE input voltage range:36~57V- Power dissipation: MAX 3.3W- Temperature Operating:: -5 ~ +70- Humidity Operating:: 5% ~ 90%- Dimension: 119*81.7*23mm
Connection instructions
- HDMI cable: Use an HDMI 1.3 cable within 3m. (at 1080P@60Hz)- Ethernet cable: Use a Cat5e/6/7 cable within 150m- Ethernet cable RJ45 wiring sequence: Follow the T568B wiring sequence (white orange, orange, white green, blue, white blue, green, white brown, brown)
Dimensions
- Package Dimensions: 22.6 x 16.8 x 7.6 cm- Item Weight: 0.81 kgHow to set
- Red light: Indicates power- Green light: Indicates signal- Many-to-many setup: CANNOT set the same ID number on the TX. RXs will automatically search for the TX signal. For example, if TX is set to 02, RX should search for 02. - Set the ID number using the "TAN" and "ONE" buttons, then press "OK".- One-to-many setup: Multiple RXs match one TX. For example, four "03" RXs match one "03" TX.Reminders
- Before connecting the HDMI Extender Matrix, directly connect your signal source and monitor and check the signal status.- If the Ethernet cable within 10 feet has no signal during testing, try using a longer cable.- When connecting to a POE Switch, no adapter is required.- If NOT using a POE Switch, two adapters need to be connected to the TX and RX for the devices to work properly.
What's in the Box
1 x Receiver1 x Power Adapter1 x Manual
Related Products
