Description
This product is a brake bleeder system that has an E20 adapter. It has a working pressure of 2 bar / 30 psi and a maximum pressure of 4.8 bar / 70 psi. It has a capacity of 3L and a bottle capacity of 1L. It has a manometer that measures 0-70psi (0 -5bar) with an E20 adapter. The filling procedure is the same as the one for the brake fluid. The operating instructions are the same as the ones for the brake fluid.
Specifications: Material: PE plastic
Color: White
Working pressure: 2 bar / 30 psi
Max. Pressure: 4.8 bar / 70 psi
Brake Bleeder Capacity: 3L
Bottle Capacity: 1L
Manometer 0-70psi (0 -5bar) with E20 adapter
Filling procedure: 1. Make sure that no pressure remains in the device. The pressure can be released from the approved valve on the side of the pump.
2. Remove the cap on top of the unit and refill the unit with new brake fluid. Make sure that there is no waste liquid or foreign bodies in the tank.
Operating Instructions: 1. Install the adapter on the master cylinder of the brake system.
2. Pump the handle of the device up and down until the recommended bleeding pressure is reached. Open the brake nipple and connect it to the appropriate breather tank. Once you see the new liquid coming into the container, close the nipple. Repeat the process on all 4 wheels (in any order).
3. When the brake fluid is flowing, ask a helper to depress the brake pedal as you watch the fluid flow through the clear tube. More than a few strokes can drain the master cylinder's reservoir, so remember to keep checking it and refill it if necessary.
4. When the process is complete, release the pressure by pushing the drain valve on the side of the pump down. After disconnecting, disconnect the fluid supply hose from the adapter on the master cylinder.
Note: Do not disconnect the adapter before releasing the pressure. Package List: 1 x Brake Bleeder
1 x Bottle
1 x Tube
1 x Accessories
1 x User manual
Related Products
