Description
The Ajax Wireless Fire Protect White is a radio-based smoke detector that monitors security in a room and notifies of smoke and sharp jumps in temperature. It has authentication to prevent forgery, jamming detection and communication channels encryption, tampering alarm, and registers smoke and sharp jumps in temperature in the room. It can operate independently from the Ajax Hub, notifying of danger by means of a built-in siren. The Ajax Wireless Fire Protect White has a sensing element of photoelectric and temperature sensors, and activation threshold of +54 to +65 degrees. The alarm signal delivery time is 0.15 seconds, and the false alarm filter is +.
The Ajax FireProtect White is a wireless fire detector with a temperature sensor that monitors security in the room twenty-four hours a day and immediately notifies of smoke and sharp jumps in temperature.
The device detects smoke by means of a camera with photoelectric sensor. If no smoke is emitted, the additional detector registers temperature increases in the room.
Independently tests the smoke chamber and gives prompt notification of the need to dust.
Please note: FireProtect operates within the Ajax system, connected to the hub via the protected Jeweller protocol.
Compatible with All Ajax Hubs, Range Extenders, ocBridge Plus and uartBridge.
Product Code: 8209.10.WH1
FEATURES OF THE AJAX FIREPROTECT:
Wireless sensor detects smoke and rising temperatures in a room without the smoke
Built-in battery (lasts up to 4 years)
Communication range of 1300m (in an open space/line of sight)
Can work autonomously using Ajax ocBridge Plus and Ajax uartBridge receivers and a smart Hub control panel
It can operate independently from the hub, emitting a fire alarm by means of a built-in siren (85dB). Several detectors indicate an alarm simultaneously.
Tamper-resistant
Detector is set up via the Ajax app for iOS, Android, macOS and Windows
System notifications delivered via push notifications, SMS and calls (if activated)
Quick and Easy installation
INSTALLATION AND SET-UP
The Ajax FireProtect comes ready to operate straight out the box.
The battery is pre-installed, so there is no need to disassemble the detector.
With one click, it can be connected to the hub in the mobile application. It can be mounted on the SmartBracket in just a few minutes.
SPECIFICATIONS OF THE AJAX FIREPROTECT:
Compatibility
All Ajax Hubs, Range Extenders, ocBridge Plus and uartBridge
Classification
Radio channel smoke detector with temperature sensor and built-in siren
Type of detector
Wireless
Installation method
Indoors
Sensing element
Photoelectric and temperature sensors
Activation threshold
+59 2
Type of notification
Sound/light
Volume of built-in siren
85 dB
Alarm signal delivery time
0.15 s
False alarm filter
Yes
Interconnected alarms
Yes
Power supply
2 x CR2 batteries, 3V (Backup battery: CR2032)
Battery life
Up to 4 years
Communication range with central unit
Up to 1,300 m in an open space
Two-way communication between devices
Yes
Operating frequencies
868.0-868.6 MHz
Self-adjusting RF output power
Up to 20 mW
Block encryption based on AES algorithm
Yes
Detector polling period
12300 s
Additional temperature sensor
Available
Operating temperature range
From 0 to +65
Permissible humidity
Up to 80%
Protection against fraud
Yes
Jamming detection
Yes
Tamper-resistant
Yes
Remote setting and testing
Yes
Certification
EN 14604
Product Dimensions
132 mm 132 mm * 31 mm
Product Weight
220g
Packaging Dimensions
165 mm x 160 mm x 35 mm
Mass of unit packed
480g
Warranty
24 months limited Manufacturers warranty. The warranty does not cover batteries.
WHATS IN THE BOX:
1 x Ajax FireProtect White
Related Products
