Description
Surfaces and Precautionary Measures: We strongly recommend that the material is stuck on a flat, smooth, clean and dry surface for best results.If you have a textured wall, it would help to work the mural into the pattern of you wall with a blow dryer on medium to high heat;until you can see the texture on the surface of the mural. This ensures that the mural's adhesive has full contact and support to the wall.
Basic installation tips: Step 1. Wipe down your wall with a dry lint-free cloth, remove all dust. The cleaner the wall the better the results. Locate the first panel indicated as #1 on the left side of these instructions.
Step 2. Lay panel face down on a flat surface. Peel the banking paper down about six inches from the top edge exposing the adhesive. Crease the banking paper edge sharply to keep it out of the way during installation.
Step 3. Align the graphic on the wall and use your fingers to tack on the graphic into place.
Step 4. Use a dry towel and begin methodically brushing with firm pressure from the center of the graphic to the left edge and then to the right edge. Start at the top of the graphic and move down.
Step 5. Continue to brush from center out as you make your way down the graphic.
Step 6. Pull the liner down as needed to expose more of the adhesive back, use two hands. Work six inches at a time for greater control.
Step 7. Once you have adhered the graphic top to bottom, using a circular motion, rebrush the outer there inches of full graphic to ensure the best adhesion.
Step 8. Repeat steps 2-7 for the remaning panels. The panels include a .5 overlap for easy seams. Finish by trimming excess material.
Related Products
