Description
The product is a wireless remote control switch system for LED stairs ceiling light strips. It includes a transmitter and receiver. The transmitter is a panel 86 wall transmitter that can be stuck anywhere, and the receiver is a toggle/self-lock, latched/inter-lock, and momentary/jog type. The transmitter has a current of 20-25ma, and the receiver has a sensitivity of -105 dBm. The transmitter operates at a frequency of 315 or 433 MHz, and the receiver operates at a frequency of 315/433 MHz. The package includes 0/2 receivers and 1/2/3 transmitters.
Specifications: Control Lights, TVs, Motors, Fans, Cameras, Video signals, Audio signals, electrically operated Doors/ Locks/ Windows.
1.Transmitter
It is a panel 86 wall transmitter that can be stuck anywhere. It is a learning code transmitter EV1527 IC Chip. It can be learned into most of the learning code receiver, it can work with any kind learning code receiver in our store.
Channel: 2CH
Remote Control Distance:0-100m
Encode: EV1527
Frequency:315 or 433 MHz
Current:20-25ma
Power Supply: 1 X 12V 27A Battery (NOT included)
2.Receiver
1)Toggle/Self-Lock: Press->On. Press again->Off
Press one button for one time is working/ON .press the same button again is stop/OFF .(1 channel switch(receiver) need 1 button remote control (transmitter).
2)Latched/Inter-Lock: Press->On. Press other button->Off
Press one button is working/ON ,press another button is stop/OFF . ( 1 channel switch( receiver) need 2 buttons remote control (transmitter).
3)Momentary/Jog: Press and hold->On. Release->Off
Keep pressing one button is working /ON. loosen your finger is stop/OFF .1 channel switch(receiver) need 1 button remote control (transmitter )
(Original Setting is Toggle , Change it by yourself.)
Power Supply (Operating Voltage): AC 220V
Relay: 20A/14VDC 20A 125VAC
Work Voltage Range of Relay: AC 220V-240V
Sensitivity:-105 dBm
Operating Temperature:-40 C ~80 C
Size:32 mm x 30 mm x 20 mm
Frequency:315 / 433 MHz
3.Package Included
0/2 x Receiver (with cover)
1/2/3 x Transmitter (without battery)
4.Learn code and Remove Code
Learning Code:
Press the learning button 3 seconds, the indicator light off .then press any button of the transmitter. The indicator flashes 3 times and the indicator light on,it means learning is successful.
Remove Code:
press the learning button about 5-8 seconds , the indicator turns o
Related Products
