Description
This is a submersible water pump with a float switch that can be used for a variety of purposes, such as to pump water out of a flooded area, to operate a fountain, or to help with garden pond care. The pump comes with a greater power (1HP) and flow rate (13500L/H or 3566 GPH), which will meet your needs to a great extent. Additionally, the pump has a lower water level limit (2 inches), so you can keep the float switch hang on and continue to pump even if the water level gets high.
1HP submersible pump as a helpful tool in case of flooding, a practical yard work accessory in your garden pond, or to operate a fountain.
The pump comes with greater power(1HP) and flow rate(13500L/H or 3566 GPH) ,which will meet your needs to a great extent.
Specification Material: Metal, Thermoplastic
Power:750W/1.0HP
Voltage/Frequency:115V/60HZ
Head MAX:9M, Capacity: 13500L/H
Horsepower: 1 HP, Max Flow Rate: 3566GPH
Max Lift: 29.5 Feet
Power Cord Length: 16.4 Feet
Discharge bore: 1.5inch
Pump Full Size: 17 x 15 x 31cm/ 6.6 x 5.9 x 12.1inch (W x D x H)
Switch Size: 10 x 7.5 x 3.8cm/ 3.9 x 2.9 x 1.5inch
Output Tie-in Diameter: 2cm/ 0.8inch
Package content 1 x Manual
1 x Water Pump
Automatic Float Switch Operate Tips
The pump with a float switch can control start/stop Automatically.
when the water level is below the initial level( =8 inch),it will automatically disconnect the power and stop working.
When the water level rises above the initial level( >8 inch),the pump will start working,automatically under the control of float switch.
The lowest water level the pump can get is 2inch.When the water level=8 inch,you can keep the float switch hang on and continue to pump to 2inch.
Related Products
