Description
This product is a resin for 3D printing. It is gray in color and has a recommended temperature range of 20-25 degrees Celsius. It is also recommended to shake the resin well before use and to keep it away from direct sunlight and children. It is also recommended to wear gloves and a mask when using the resin. The resin can be washed with organic solvents or isopropyl alcohol, and should be washed immediately if it comes in contact with the skin. The resin has a best-before date of 12 months and is available for questions or service.
1. Tips: -Shake gently and well before using. -Keep away from children, dust and direct bright sunlight. -Recommended temperature 20C - 25C for storage. -Wash the models about 30s by 95% or more concentration organic solvent or isopropyl alcohol. -Suggest to wear gloves and mask to avoid direct skin contact. -Wash with plenty of water immediately if you get direct skin contact with resin.
2. Resin Parameters: Bottom Exposure Time: 30s, each layer exposure time: 5~8s.Thickness of Layers: 0.05mm, Suitable for NOVA Elfin 3D printer only.Solidify Wavelength: 405nm Viscosity (25C): 150-200MPa Density: 1.05-1.20 / cm3 Tensile Strength: 36-52Mpa Elongation at break: 11-20% Flexural Strength: 59-70MPa Flexural Modulus: 1.882-2.385Mpa Hardness (Shore D): 84D Heat Deflection Temperature: 80C Glass Transition Temperature: 100
3. Service: -Best-before date: 12 months -Any questions please contact with us directly, we will answer within 24 hours, excluded some holiday.