Description
This product is a resin for 3D printing. It is recommended for use with the NOVA Elfin 3D printer. The product comes with instructions on how to use it and a warranty. The product has a recommended temperature range of 20-25 degrees Celsius, and should be stored in a dry place. The product should be shaken well before use, and should be kept away from direct sunlight and children. The product should be washed with a solvent such as isopropyl alcohol or organic solvent before use. If the product is accidentally touched with skin, it should be washed with plenty of water immediately.
1. Tips: -Shake gently and well before using. -Keep away from children, dust and direct bright sunlight. -Recommended temperature 20C - 25C for storage. -Wash the models about 30s by 95% or more concentration organic solvent or isopropyl alcohol. -Suggest to wear gloves and mask to avoid direct skin contact. -Wash with plenty of water immediately if you get direct skin contact with resin.
2. Resin Parameters: Bottom Exposure Time: 30s, each layer exposure time: 5~8s.Thickness of Layers: 0.05mm, Suitable for NOVA Elfin 3D printer only.Solidify Wavelength: 405nm Viscosity (25C): 150-200MPa Density: 1.05-1.20 / cm3 Tensile Strength: 36-52Mpa Elongation at break: 11-20% Flexural Strength: 59-70MPa Flexural Modulus: 1.882-2.385Mpa Hardness (Shore D): 84D Heat Deflection Temperature: 80C Glass Transition Temperature: 100
3. Service: -Best-before date: 12 months -Any questions please contact with us directly, we will answer within 24 hours, excluded some holiday.
Related Products
