Description
The 800W electric concrete vibrator is a heavy-duty machine that is used to vibrate concrete to make it dense. It is easy to operate and is essential for construction use. The vibrator is also good for home use. The specifications include a rated current of 2.8 A and a rated voltage of 220 V/110 V. The frequency is 50 Hz/60 Hz. The needle diameter is 35 mm and the shaft length is 120 cm. The total weight is 6.3 kg.
Description: Hand Held Concrete Vibrator, is a kind of professional construction tool machine, widely used in construction places.
Easy to operate, the electric concrete vibrator is essential to construction use, ensuring the fastness of buildings.
Vibrate pouring concrete to make it dense.
It suits for both construction sites and home.
NOTE: To assemble the hose to the unit: it is a reverse thread.
Specifications: Rated current: 2.8 A
Rated voltage: 220 V/110V
Frequency: 50 Hz/60Hz
Needle diameter: 35 mm
Shaft length: 120 cm
Total weight: 6.3 kg
How to Use: Maintenance and inspection
Before any work on the machine itself, pull the mains plug.
The brushes should be checked periodically and warm-out brushes should be replace in time,after replacing,inspect,whether the new brushes
can move freely in the brush holder,keep running the motor for 15 minutes to match the contact of brushes and commentators.
Keep the ventilation slots clear from dirt , clean off the accumulated dust and oil dirt periodically.
During normal operation , if anything happens ,the power supply should be cut off at once and the tool should be checked and repaired
Regular inspect all mounting screws and ensure that they are properly tightened, should any of the screws be loosen,Tighten them immediately,
failure to do so could result in personal injury
Do not expose the tool to rain , Do not use power tools in damp or wet location ,keep work area well lit do not use power tools where there is risk to
cause fire or explosion.
Package Content: 1 * 800W Concrete Vibrator
1 * 1.2m Hose
Related Products
