Description
This product is a guitar wall mount that has an auto lock design. It is made out of PA66 and EVA cushion and is 153x99x31mm. It weights 154g. The product comes with a wall mount body, wall mount base, 2 screws, 2 anchors, and a screw. The installation process is as follows: first, drill holes in the wall base on the screw markings, then drill holes in the wall base on the screw markings. The product is meant for concrete or hard wood walls, and should not be mounted on plasterboard or any thin wall with less than the screw length.
Aroma Guitar Wall Mount, Auto Lock Design, Fits All Size Acoustic Guitar, Electronic Guitar and Bass Lock your guitar automatically when putting guitar neck on the arm. And Automatically release when lifting your guitar.
Specification:
Dimensions: 153*99*31mm
Weight: 154g
Material: PA66, EVA cushion
Package content:
1* wall mount body
1* wall mount base
2* screws(for wall)
2* Ribbed Anchors
1* screw (for fastening the base and body)
Installations in 4 Easy Steps 1 Drill holes on the wall base on screw markings
2 Drill holes on the wall base on screw markings
Note 1: Use drill kit with diameter 1/4". Never use larger drill kit, otherwise the hole will be too large to hold the wall mount tightly.
Note 2: Only drill hole on concrete wall or hard wood wall. Do not mount the base plate on plasterboard or any thin wall with thickness less than the screw length.
3 Push the wall anchor inside the holes, screw in the base plate onto the wall. Edge of the wall anchor will be expanded by the screw and hold tightly inside the holes.
4 Connect the guitar hanger with the base plate, drive the little screw at the bottom area to secure the connection.
Related Products
