Description
This product is a thermo coupler for gas patio heaters. The steps to install it are: (1)Install the thermocouple tip on a board and use two nuts to fix its location; (2)Keep the tip about 5mm from the burner hole; (3)Fix the thermocouple nut M8 on the valve end tightly; (4)Connect two flat terminals well with the current tilt switch terminals; (5)Turn on the gas and push your valve 5-10s till the thermocouple end is heated; (6)Release your hand and it work well. If failed, please check: (a) If your thermocouple is heated on flame; (b) If the thermocouple end is well connected with valve; (c) If the terminals connect tilt switch well.
Install steps: (1)Install the thermocouple tip on a board and use two nuts to fix its location
(2)Keep the tip about 5mm from the burner hole.
(3)Fix the thermocouple nut M8 on the valve end tightly (Check if your valve end thread is 8mm before your buying)
(4)Connect two flat terminals well with the current tilt switch terminals.
(5)Turn on the gas and push your valve 5-10s till the thermocouple end is heated.
(6)Release your hand and it work well. If failed, please check
a. If your thermocouple is heated on flame
b. If the thermocouple end is well connected with valve
c. If the terminals connect tilt switch well.