Abytele Ac 110V 1CH 1CH Wireless Remote Control Switch Receiver +86 Wall Panel Transmitter For Hall Bedroom Ceiling LED Light 315 Mhz

Manufacturer

Unbranded

This product is a wireless remote control switch receiver and transmitter. The transmitter can be stuck anywhere and can be learned into most of the learning code receivers. The distance range is 0-100m. The encode is EV1527. The frequency is 315 MHz. The size is 86mm x 86mm x 10mm. The power supply is 1 X 27A-12V Battery (included). The receiver can decode fixed code and has a sensitivity of -105 dBm. The operating temperature range is -10'C ~ 60'C. The package includes 1 x receiver and 1 x transmitter.

1.Transmitter:
It is a panel 86 wall transmitter that can be stuck anywhere. It is a learning code transmitter EV1527 IC Chip. It can be learned into most of the learning code receiver, it can work with any kind learning code receiver.
Distance:0-100m
Encode: EV1527
Frequency:315 MHz
Size: 86mm x 86mm x 10mm
Power Supply: 1 X 27A-12V Battery (included)

2.Control Mode
1)Toggle/Self-Lock: Press->On; Press again->Off Press one button for one time is working/ON .press the same button again is stop/OFF .(1 channel switch(receiver) need 1 button remote control (transmitter).
2)Latched/Inter-Lock: Press->On; Press other button->Off Press one button is working/ON ,press another button is stop/OFF . ( 1 channel switch( receiver) need 2 buttons remote control (transmitter).
3)Momentary/Jog: Press and hold->On; Release->Off Keep pressing one button is working /ON. loosen your finger is stop/OFF .1 channel switch(receiver) need 1 button remote control (transmitter )

(Original Setting is Toggle , Change it by yourself.)

3.Receiver
Decode: Fixed code, soldering
Power Supply (Operating Voltage): AC 110V
Relay: 10A/250V AC, 10A/125V AC, 10A/30V DC, 10A/28V DC
Sensitivity:-105 dBm
Operating Temperature:-10'C ~ 60'C

4.Package Included
1 x Receiver (with cover)
1 x Transmitter (with battery inside)

5.Learn code and Remove Code
Learn: input the 110V for the receiver,press the learning button until the LED indicator ON.Then press the transmitter ,the indicator flash fast,it means learning successfully.
Remove:keep pressing the learning button on the receiver until the indicator ON and flash fast,it means the codes is cleared successfully.