Description
This product is a brake bleeder vacuum brake bleeder tool with universal adapter. It is suitable for motorcycles and automobiles. It is also used to add new brake oil to the oil tank and to eliminate gas generated in the brake system.
Product Features: This product is mainly used for extracting brake oil and replacing brake oil. It is suitable for motorcycles and automobiles.
1. Add the new brake oil to be replaced in the oil tank and open the valve on the brake oil pot (automatically replenish when the brake oil is insufficient)
2, the oil pump is connected to the gas source, press the switch, one person can complete all work charge
Carton package size 270-210-130mm
Carton pack containing 0.78 kg
Instructions: 1. Install the black rubber tube to the oil drain hole of the brake cylinder and use a wrench to turn the oil bolt counterclockwise.
2. Pinch the handle of the brake bleeder to expel the previously dirty brake fluid from the vehicle brake system.
3. Open the brake fluid reservoir lid of the vehicle. Select the appropriate size plastic buckle, screw on the filler bottle bolt, install the filling bottle in the liquid storage tank mouth, the threaded port must be submerged in the brake fluid, if not immersed in the brake fluid, rotate counterclockwise Move the steering valve and know that there are enough screws to be soaked in the brake fluid.
4. Add half bottle of brake fluid to the refill bottle, screw the plastic screw cap to the thread, invert the refill bottle, put the refill bottle into the neck of the brake fluid reservoir of the vehicle, and open the valve to let the liquid flow horizontally. When the brake fluid level in the reservoir rises to the refill bottle opening, the brake fluid in the refill bottle will automatically stop flowing.
5. Repeat step 2 to eliminate the gas generated in the brake system when adding brake fluid until no air bubbles appear in the tube.