Description
The Dikale 3D Pen is a 3D drawing and printing pen that comes with 18 colors of PLA filament refills and 250 stencils. It has a product model of DKL-07A and is made by the brand dikale. It is suitable for PLA and ABS filaments with a diameter of 1.75mm and operates on a voltage of DC5V-2A with a power of 10W. The operating temperature ranges from 185?-210?. To use the pen, the power supply must be connected and the desired filament mode can be selected by clicking the "M" button and confirming with the "?" button. The pen will heat up and the filament can be loaded through the input hole. After drawing, the filament can be unloaded by long pressing the "U" button. Safety warnings include not touching the extruding nib during use, unloading the filament and turning off the power after use, and not touching the nozzle until it has cooled. To prevent clogging, it is important to keep both ends of the filament even before and after loading or unloading, and to re-heat the pen and press the feed button if the filament was not removed after previous use.
Parameter
Product Model: DKL-07A
Brand Name: dikale
Suitable Filament: PLA/ABS f1.75mm
Voltage: DC5V-2A
Power: 10W
Operating Temperature: 185?-210?
Operation Guide
Connecting the power supply, the power indicator turns to be yellow, LCD shows "PLA"(click "M" button to select "ABS" if you need). Click "?" to confirm the filament mode you need.
Then LCD shows "5-3"(click "M" button to select other speed if you need) and the function indicator turns to be red(means start heating).
Wait until the function indicator turns to be green(means finish heating).
Then click "?" button and put the filament to the filament input hole, start loading. After the filament come out of the pen nib, you can draw your dream now.
When finish drawing, long press "U" button to unload the filament.
Keep both end of the filament be even before loading or after unloading so as not to cause stuck.
Safety Warnings
1. DO NOT touch the extruding nib (nozzle) during use.
2. PLEASE unload the filament after use and turn off the power.
3. DO NOT touch the nozzle before the 3D printing pen has time to cool.
To Prevent Clogging:
1. Keep both end of the filament be even before loading or after unloading so as not to cause stuck.
2. If filament wasn't removed after previous use, re-heat the pen then press the feed button. Do not press the 'back' button.