Wingoneer WX6000 Multifunction Expansion Shield 7.1 Channel Surround Audio Systems For Raspberry Pi 1 Model B+ 2 Model B 3 Model B

Brand	Unbranded
Manufacturer	Unbranded
Model Number	B06XC1WRC1

WINGONEER trademark Reg.NO:4747611

Key Features:
- Ideal for Home Theater Systems
- Ideal for 7.1 channel surround audio systems
- Used four ESS Tech Sabre premier stereo DACs ES9023
- ES9023 delivers jitter-free studio quality audio with 112dB DNR
- Each DAC has independent ultra-low-jitter clock generator
- Used the Texas Instruments ultra-low-noise voltage regulator
- Supports up to 1TB 2.5-inch SATA hard drives
- High quality video performance
- Supports SPDIF Optical Digital Audio
- Supports HDMI high-bit-rate (HBR) audio
- 4 analog stereo 3.5mm jack outputs
- Selected high quality components (Solid Capacitors, Murata MLCC etc)
- Allows you to split the audio stream from a HDMI signal
- No HDMI output connection is required to receive audio at the analog and optical outputs
- Connects directly to the Raspberry Pi
- Powers the Raspberry Pi - no additional power supply

Specification:
- Power supply: +5Vdc +/-5% (It is recommended to use the power adapter 5V 4A)
- DC Power Plug Size : 5.5*2.5mm
- Input Ports: 1 x HDMI
- Output Ports: 1 x HDMI, 1 x Optical, 4 x 3.5mm Phone Jack
- Analog audio output level: 2V RMS
- Optical S/PDIF Audio Sampling Rate: Up to 192 kHz
- DMI Audio Format: LPCM 2/5.1/7.1CH, Dolby Digital 2~5.1CH, DTS 2~5.1CH, Dolby; Digital Plus Dolby TrueHD, and DTS-HD Master Audio
- Optical Audio Format: LPCM 2CH, Dolby Digital 2~5.1CH, and DTS 2~5.1CH
- Size 122mm x 90mm x 90mm

Notes:
- WARNING: DO NOT APPLY POWER TO YOUR RASPBERRY PI VIA THE PI's MICRO USB SOCKET.
- Approx 3 seconds delay to turn on Raspberry Pi after power apllied.
(The powerful HDMI audio processing chipset needs time to bootup)


Packing List:
1 x WINGONEER WX6000_7.1CH Expansion board
1 x HDMI bridge