Description
The product is a 5.3kWh lithium battery module that is designed to be used indoors with a IP20 rating. It is expandable and has two terminals for connecting the power supply. The battery is also designed to be used in a dual voltage LV/HV configuration or in a high voltage HV configuration. The battery is also compatible with a low voltage system and a high voltage system. The battery has a capacity of 100Ah and a usable capacity of 85Ah. The dimensions of the battery are 580x463x155mm. The weight of the battery is 57.3kg. The charge/discharge current of the battery is 100A. The DOD% of the battery is 100%. The communication port of the battery is RS485, CAN, 232, and wifi. The discharge temperature range is -20 to 55 degrees Celsius and the charge temperature range is -10 to 55 degrees Celsius. The shelf temperature range is -10 to 50 degrees Celsius. The IP rating of the battery is IP20. The battery is designed for use in a 7,000m altitude. The battery is designed for use with authentication level IEC62619/UL1973 CE/UN38.3. The battery has features such as a pre-charge function
5K3XP-BRKWECO SINGLE MODULE, HV/LV, 48V, 5.3KWH, INCL BRACKET AND LV CABLES - 5K3XP-BRK
WeCoS 5.3kWh comes complete, with mounting bracket and LV cables.
The Stackable Module is a DUAL VOLTAGE module that can be used in a Low Voltage(48.5-58.4Vdc) configuration or in a High Voltage(80/200-750Vdc) configuration.
Weco's single module, 5.3kWh is the most advanced lithium module for home and industrial. The energy storage module offers both on-grid and off-grid energy storage. One product is suitable for two applications LV or HV. Fast connections. When installed the lithium battery can be wall or floor-mounted, stackable, serial or parallel all depending on your unique requirement. High capacity output is achieved thanks to expandable and simple configuration.
The WeCo 5.3kWh Battery Module has two terminals for connecting the power supply.The low voltage screw terminal only supports parallel connection with maximum voltage 60V.Fast Connector terminals only support series connections up to 1000Vdc (always check the HV BOX max Voltage).Make sure to use the correct inverter charging parameters before connecting to the battery.
This Battery Module is designed to be used indoor with a a IP20 rating. In the event of multiple modules installed on the wall. Make sure to respect the distance of 25cm between each module. As well as 30cm below the ceiling line. The battery is always delivered in WALL mode and it is, therefore, necessary for the installer to make simple changes to install the STACK kit.
One product is used in three different configurations.
One module of 5.3kWh
5 modules in parallel. Also referred to as a cluster within the industry
5 clusters of 5 modules each thanks to WeCo HUB to achieve a power demand of up to 132.5kWh
LV parallel 15 modules
Serial connection on 16 modules
BMS power switch | Single CAN + DI/DO RJ 45 cable | BMS new generation pulse equalizer | Whole cluster FW upgrade via master(LV) | Whole cluster FW upgrade (HV Box + Battery) viaHV Box | Calendar data logs accessible in CSV from BMS | WiFi & bluetooth built in HV Bos start up 80Vdc (2 modules)
Product in compliance with the Extended Producer Responsibility Scheme.Read more...
Letter of Authority issued for the product by the NRCS in compliance with VC Safety Regulations.
Specifications
Battery System Capacity (kWh)
5,3
Single Module Nominal Voltage (V)
51,2
Application
Dual Voltage LV/HV
Expandibility
HV Mode: Max 16 Modules in Series with Single HV Box = One HV ClusterLV Mode: Max 15 Modules in Parallel without LVHub = One LV Cluster
Cluster Net Capacity
Max 144 Modules per HV System / Max 100 Modules per LV System
BMS Voltage Range (V)
45,5 58,4
Cell Capacity (Ah)
105
Usable Capacity (Ah)
100
Dimension (WxDxH mm)
580x463x155
Weight (Kg)
57,3
Charge / Discharge Current (A)
100 *
DOD% (Up to)
100%
Communication Port
RS485, CAN, 232, Wifi
Discharge Temperature /C**
-20 ~ 55
Charge Temperature /C**
-10 ~ 55
Shelf Temperature/C
-10 ~ 50
IP Rate
IP20
Altitude (m)
7000 / 25C
Authentication Level
IEC62619/UL1973 CE/UN38.3
Features
Pre-Charge+Fuse LV+ Fuse HV+ Auto Contactor + Dual BMS+ Multi BMS FW management
Aplicability for Low Voltage and High Voltage systems, Four protections levels with HV BOX, real time balancing, Adaptive charge /discharge CAN logic, 3 steps adaptive charging logic, 2xDI/DO programmable, Mobile APP for monitoring and remote control,update, debug, data save.
See warranty terms for Performance warranty applicability
See Performance Warranty Terms and the Standard Test Conditions STC for operative temperature and standard current.
ll data is subject to change without prior notice; always ask WeCo for the most recent datasheet and manual before purchasing. No part of this document can be copied or reproduced without written permission of WeCo.
Related Products
