Description
The Mecer IVR-1200LBK inverter is a simulated sine wave inverter that has a wide input voltage range of 90-280 VAC. It also has built-in AVR for voltage regulation, overload and short circuit protection, and LCD display for comprehensive information. The inverter has a capacity of 2400 VA and a power factor of 0.6. It also has a line mode that outputs voltage and bypass mode that outputs voltage the same as input voltage. The AVR mode outputs voltage = Input voltage 1.2 at Input voltage - Output Frequency Same as input. The battery mode outputs voltage 230 VAC +/- 10% and has a transfer time of 20ms. The short circuit protection is line mode breaker and battery mode current limit +Firmware Protection. The environment is operating humidity 0 to 90% relative humidity(non-condensing), operating temperature 0 degrees C to 40 degrees C, and storage temperature -15 degrees C to 50 degrees C. The inverter is included in the box.
Mecer has been one of South Africa’s top-selling PCs over the past two decades. Mustek’s ongoing interaction within the international IT industry has ensured that Mecer has remained a techno-leader at the forefront of technology.
Features:
- Simulated sine wave inverter
- Built-in AVR for voltage regulation
- Wide input voltage range: 90-280 VAC
- 24VDC
- Overload and short circuit protection
- LCD display for comprehensive information
Specifications:
- MODEL: Mecer IVR-1200LBK
- CAPACITY: 2400 VA / 1440 W
- POWER FACTOR: 0.6
- Input Voltage range 90-280VAC
Line Mode:
- Output Voltage
- Bypass mode: 0utput voltage same as input voltage
- AVR mode:Output voltage = Input voltage 1.2 at Input voltage – Output Frequency Same as input
Battery Mode:
- Output Voltage 230Vac +/-10%
- Transfer Time 20ms typical
- Waveform Modified Sine-wave
Overload Capability:
- Bypass Mode (in VA and Watts) Load >110%+/-15% , alarm 5 mins then fault
- Load >130% +/-15%, fault immediately.
- AVR Mode (in VA and Watts)at Input voltage > 170VAC Load >100%+/-15%, go to bypass mode
- AVR Mode (in VA and Watts)at Input voltage < 170VAC Load >60%+/-15%, go to bypass mode
- Battery Mode (in W) Load>110% +/-15%, overload alarm for 15s, and then will switch to fault mode for 10s. Then unit will re-start for 5 times Load>120% +/-15% , fault & cut off O/P immediately.
Short Circuit Protection:
- Line Mode Breaker
- Battery Mode Current limit +Firmware Protection
Battery:
- Battery Voltage 24 VDC
- Acceptable Battery Type Rechargeable lead-acid battery, Deep discharge battery
- Polarity Reserve Protection Yes
- Charger available I/P range 90~280V
- BATTERY’S NOT INCLUDED
Charger:
- Constant Current Charger Voltage 28.6VDC +/-2%
- Floating Charge Voltage 27.4VDC +/-2%
- Maximum Charge Current 10A or 20A
- DC Start Voltage >22VDC
Physical:
- Dimension, D X W X H (mm) 350 x 90 x 300
- Net Weight (kgs) 5.5
Environment:
- Operating Humidity 0 to 90% Relative Humidity(Non-condensing)
- Operating Temperature 0 degrees C to 40 degrees C
- Storage Temperature -15 degrees C to 50 degrees C
What’s in the box
- 1 x Mecer Lobo 2400VA 1440W 24V Inverter
Related Products
