Description
This cable is for connecting a rear view camera to a car's OEM multimedia system without navigation. It will allow you to use an aftermarket camera without damaging the car's wires. The cable has a 32 pin connector on one end and a plug on the other end. The plug end has a connector for the camera, and the other end has a connector for the car's audio system. The cable is compatible with cars from the EU, US, CA, BR, Asia, and South America. The only exception is the Nissan Audio system in the 2011-2018 Altima, Altima Hybrid, Micra, Cube, Frontier, Note, Note Versa, Juke, Rogue, NV Cargo, NV Passenger, Rogue Select, Pulsar, NV200 Taxi, Teana, Titan, Versa Note, Qashqai, Murano, Navara, NP300 Navara, Sentra, Versa Sedan, and X-Trail. If your car doesn't have an OEM Nissan Audio system, you will need to provide a gray REV wire to the cable in order for the backup activation signal to work. The cable is also compatible with cameras that require more than +6 volts of power, such as NTSC cameras.
Cable for rear view camera connection in Nissan cars with OEM Nissan Audio multimedia system without navigation. Using this cable you will be able to install an aftermarket camera Plug&Play without damaging the car wires. Image from the camera will automatically be displayed on the screen when reversing. Dynamic parking lines that will turn with the steering wheel will be displayed on the camera image. Parking lines can be adjusted in the service menu. The device is connected to the 32 pin socket. After connection all OEM devices that work using this socket will not be disturbed and will continue to work as they did prior to the connection.
Note! If your car radio was not installed by the manufacturer, the backup activation signal may be absent from the wires connected to the car radio. For cases like this there's a gray REV wire in our cable. +12 V should be supplied to this wire when the car is switched to reverse (may be taken from the rear lamp). Also, you may check the connection of this activation signal in the diagnostics menu. The additionally installed rear view camera should be powered from ACC line (first turn of the key), otherwise the camera input will be not active. Depending on the type of the camera to be connected, namely on the voltage required for the camera, you can use input voltage +6 V, which the monitor produces. In case the camera requires more than +6 V, connect the camera power to ACC line. Only NTSC cameras are supported.
Compatibility EU/US/CA/BR/Asia market Nissan Audio without navigation with 4.2"/5"/7" screen
2011-2017: Almera/Altima/Altima Hybrid/Micra
2011-2018: Cube/Frontier/Note/Note Versa
2011-2019: Juke/Rogue
2012-2019: NV Cargo/NV Passenger/Rogue Select
2014-2018: Pulsar
2014-2019: NV200 Taxi/Teana/Titan/Versa Note/Qashqai
2015-2018: Murano
2015-2019: Navara/NP300 Navara/Sentra/Versa Sedan/X-Trail
2016-2019: Lannia/Tiida
Related Products
