Vansful - 14 In 1 Full Panel Strips For Water Quality Testing

Brand	Unbranded
Manufacturer	Unbranded
Model Number	VANSFUL_WATER_14_IN_1

The product is a set of 14 water quality test strips. The strips provide a comprehensive panel of parameters for testing water, including residual chlorine, pH, total alkalinity, hardness, iron, copper, lead, nitrate, nitrite, bromine, and total chlorine. The test can be performed with drinking water, pool, spa, ponds, aquarium, and industrial waste water. The test can be performed at an ambient temperature between 2-30 degrees Celsius and relative humidity of less than 80%. The strips can be read visually or instrumentally.

The bottle of 100 strips provides a comprehensive panel of parameters for testing water as follows:-
Residual Chlorine
pH
Total Alkalinity
Hardness
Iron
Copper
Lead
Nitrate
Nitrite
Bromine
Total Chlorine
Cyanuric Acid
Chromium / Cr
Fluoride
USAGE:
Water test strips are made for water quality testing of both qualitative and semi-qualitative.
The results on the strips can be read visually or instrumentally.
Tests can be performed with Drinking Water, Pool, Spa, Ponds, Aquarium and Industrial Waste Water.
TESTING CONDITIONS AND RANGES:
Test your sample at an ambient temperature between 2 - 30, and relative humidity of less than 80.
INSTRUCTIONS:
Collect water sample to be tested in a vial, cup or container
Immerse the test strip in the desired water sample and remove within 5 seconds
Hold the strip horizontally and gently tap or shake to remove excess water. Take extra precaution to ensure that the water from test pads don'tbleed into each other
Read the test results carefully within 60 seconds in a good light and with the test area held near the color chart on the bottle label. Changes in colorthat appear along the edges of the test pads or after more than 2 minutes have passed are of no significance.