Description
CODE: TS-EC1679U-RP P80
Quick Specs: QNAP* TS-EC1679U-RP Turbo NAS - 16-Bay, SerialATA 6Gbps, XEON E3-1225 , 4GB DDRIII ECC RAM (Up to 16GB), 4x Gigabit LAN Port, Optional 10GbE, USB 3.0, Firmware 3.8, 2U
Specifications: CPU Quad Core Intel* Xeon* E3-1225 Processor 3.1 GHz
DRAM 4GB DDR3 ECC RAM
Note: 1. The system memory can be increased to 16GB by installing Three additional 4GB Long-DIMM RAM modules.
2. For he information of RAM module installation and compatible NAS models, please refer to the QNAP RAM Module Installation Guide
Flash Memory 512MB DOM
Hard Drive 16*x 3.5" or 2.5" SATA 6Gb/s, SATA 3Gb/s hard drive or SSD
Note: 1. The standard system is shipped without hard drives.
Hard Drive Tray 16 x hot-swappable and lockable tray
LAN Port 4 x Gigabit RJ-45 Ethernet port
(Expandable up to 8 x 1 Gb LAN or 4 x 10 Gb + 4 x 1 Gb LAN by installing optional dual-port 10 Gb and 1 Gb network card)
Note: 1. For the information of network card installation, please refer to chapter 6 in the Turbo NAS Hardware Manual.
LED Indicators Status, 10 GbE, LAN, eSATA, hard drives
USB 2x USB 3.0 port (rear)
4x USB 2.0 port (rear)
Support USB printer, pen drive, USB hub, and USB UPS etc.
eSATA 2 (rear)
Buttons System: Power button and reset button
Alarm Buzzer System warning
Form Factor 3U, Rackmount
Dimensions 130(H) x 442.4(W) x 528.3(D) mm
5.12(H) x 17.42(W) x 20.80(D) inch
Weight 20.21 kg/ 44.56 lb (Net)
24.79 kg/ 54.65 lb(Gross)
Sound Level (dB) Standby: 54.73dB
In operation: 55.13 dB
(with16 x 1TB HDD installed)
Power Consumption (W) Sleep mode: 89.1 W
In Operation: 229 W
(with 16 x 1TB hard drive installed)
Temperature 0~40˚C
Relative Humidity 0~90%
Power Supply Input: 100-240V AC,50-60Hz
Output: 600W
Expansion Slot 2 (for network and storage expansion)
VGA Reserved for maintenance
HDMI Reserved for maintenance
Fan 3 x 6 cm smart cooling fan
Remark: The TS-x79 rack mount models comply with ANSI/EIA-RS-310-D rack mounting standards. Before purchasing the server racks for these models, please make sure the server racks conform to the following criteria:
- Rack size
A. Mounting post width: ≥ 450mmB . Panel width: ≥ 485mmC. Mounting post depth: 650mm~850mm
- If the NAS is to be installed in a rack, a rack shelf or QNAP rail kit (optional purchase) is required.
- The optional rack kits for the TS-x79 rack mount models are only compatible with square-hole server racks.