Elinchrom BXRi 250 + 500 To Go Set

Basic Features

• Flash power up and down buttons
• Modelling lamp power up and down buttons
• Modelling lamp prop / free / off button
• Photocell on / off button
• Ready charge beep on / off button
• Test-flash button
• 3.5 mm synchronisation socket
• EL-Skyport Wireless Triggering & Remote

• Visual-Flash-Control or ‘VFC’ mode switches off the modelling lamp whilst the flash unit recharges after a flash has fired.

  This function gives a visual check that all the studio flash units have fired and this mode can be activated together with the Ready Charge beep for maximum control

• Proportional Modelling lamp Setup or ‘PMS’ is useful when using a flash setup with compact flashes of different powers, the modelling lamp can be reduced to -1 f-stop for better visual proportionality
• Eye-Cell Automatic & Manual mode avoids incorrect synchronisation with the camera.

  Elinchrom’s Eye-Cell feature detects camera red-eye pre-flash as some cameras may respond and release a flash with the first pre-flash of the camera spoiling your shot

• Charge Ready Beep can be customised from short to long beep signals.The acoustical signal length can be set from 70 to 490 milliseconds
• EL-Skyport wireless triggering & remote control allows the changing of flash power settings, or to switch the modelling lamp on and off.

  Please note using this feature requires the optional EL-Skyport Transmitter. Group and Channel Frequency settings can be customised on each BXRi unit

• Flash and modelling lamp power adjustments are normally set in 1/10th steps only per touch, these steps can be changed from 1/10th to 7/10th or to 1 f-stop.
• A Temperature controlled FAN switches the FAN ON and OFF automatically if the units temperature increases.

  The microprocessor controls the unit temperature and the fan

• EL-Skyport Transmitter Speed is designed with the latest 2.4GHz Digital Wireless Technology
• LED status for EL-Skyport sync mode and battery status
• Improved housing, battery drawer and switches
• Improved integrated Hot-shoe with screw lock
• Improved SYNC-socket for direct connection
• Standard and SPEED Sync modes, Standard mode is fully compatible with previous EL-Skyport versions.

  SPEED is available for Ranger Quadra AS, BXRi 250 / 500 und D-Lite-it and all other units

• Up to 60 m range indoors for STANDARD mode and up to 40 m in SPEED mode
• Up to 120 m range outdoors for STANDARD mode and up to 60 m in SPEED mode
• Up to 1/150s shutter speed for DSLR cameras in NORMAL mode.
• Up to 1/250s shutter speed for DSLR cameras in SPEED mode.
• +/- Buttons to change flash power settings of RX units and to switch Modelling lamp on/off
• Test button for manual flash trigger.
• Interference free operation with 40 Bit security
• Switch to select 8 Frequency Channels for between separate working areas.
• Switch to select 4 Workgroups for adjusting and synchronising individual units or groups
• Long battery life up to 6 Months or over 30 000 flashes
• The “All” switch controls all units in Workgroup 1-4
• The moveable antenna optimises reception and working distance
• Compatible with BXRi 250 / 500 and Ranger Quadra AS & D-Lite-it with "onboard" ELS Transceiver

• The new Portalite diffuser and black-silver tissue are the same quality materials which Elinca uses for Rotalux .

  The EL Speed-Ring and rods are re-designed and the resulting in a softbox with better stability while being easier t