Description
This motherboard has a LGA1700 socket, support for the 13th and 12th Generation Intel Core, Pentium Gold and Celeron Processors, DDR5 memory, an integrated graphics processor, 1x HDMI port, 1x DisplayPort, 1x audio jack, 8x USB 3.2 Gen 2 ports, 1x USB 3.2 Gen 1 port, 1x Trusted Platform Module header, 1x reset button, 1x Q-Flash Plus button, 1x Clear CMOS button, 1x reset jumper, 1x Clear CMOS jumper, and a M.2 Socket 3.
Specifications
CPU
- LGA1700 socket: Support for the 13th and 12th Generation Intel Core, Pentium Gold and Celeron Processors- L3 cache varies with CPU
Chipset
- Intel Z790 Express Chipset
Memory
- Support for DDR5 7600(O.C.) /7400(O.C.) /7200(O.C.) /7000(O.C.) /6800(O.C.) /6600(O.C.) / 6400(O.C.) / 6200(O.C.) / 6000(O.C.) / 5800(O.C.) / 5600(O.C.) / 5400(O.C.) / 5200(O.C.) / 4800 / 4000 memory modules- 4 x DDR DIMM sockets supporting up to 128 GB (32 GB single DIMM capacity) of system memory- Dual channel memory architecture- Support for ECC Un-buffered DIMM 1Rx8/2Rx8 memory modules (operate in non-ECC mode)-Support for non-ECC Un-buffered DIMM 1Rx8/2Rx8/1Rx16 memory modules- Support for Extreme Memory Profile (XMP) memory modules
Onboard Graphics
- Integrated Graphics Processor-Intel HD Graphics support (Graphics specifications may vary depending on CPU support.)- 1 x HDMI port, supporting a maximum resolution of 4096x2160@60 Hz * Support for HDMI 2.0 version and HDCP 2.3.- 1 x DisplayPort, supporting a maximum resolution of 4096x2304@60 * Support for DisplayPort 1.2 version and HDCP 2.3
Audio
- Realtek Audio CODEC- High Definition Audio- 2/4/5.1/7.1-channel * You can change the functionality of an audio jack using the audio software. To configure 7.1-channel audio, access the audio software for audio settings.-Support for S/PDIF Out
LAN
- Realtek 2.5GbE LAN chip (2.5 Gbps/1 Gbps/100 Mbps)
Wireless Communication module
- Intel Wi-Fi 6E AX211- WIFI a, b, g, n, ac, ax, supporting 2.4/5/6 GHz carrier frequency bands- BLUETOOTH 5.3- Support for 11ax 160MHz wireless standard and up to 2.4 Gbps data rate * Actual data rate may vary depending on environment and equipment.
Expansion Slots
- CPU:- 1 x PCI Express x16 slot, supporting PCIe 5.0 and running at x16 (PCIEX16) * For optimum performance, if only one PCI Express graphics card is to be installed, be sure to install it in the PCIEX16 slot.
- Chipset:- 1 x PCI Express x16 slot, supporting PCIe 4.0 and running at x4 (PCIEX4_1)- 1 x PCI Express x16 slot, supporting PCIe 3.0 and running at x4 (PCIEX4_2)
Storage Interface
- CPU:- 1 x M.2 connector (Socket 3, M key, type 22110/2280 PCIe 4.0 x4/x2 SSD support) (M2A_CPU)
- Chipset:- 2 x M.2 connectors (Socket 3, M key, type 22110/2280 PCIe 4.0 x4/x2 SSD support) (M2P_SB, M2Q_SB)- 1 x M.2 connector (Socket 3, M key, type 22110/2280 SATA and PCIe 4.0 x4 SSD support) (M2M_SB)- 6 x SATA 6Gb/s connectors- RAID 0, RAID 1, RAID 5, and RAID 10 support for NVMe SSD storage devices- RAID 0, RAID 1, RAID 5, and RAID 10 support for SATA storage devices * Refer to "2-8 Internal Connectors," for the installation notices for the M.2 and SATA connectors.
USB
- Chipset:- 1 x USB Type-C port on the back panel, with USB 3.2 Gen 2x2 support- 1 x USB Type-C port with USB 3.2 Gen 2 support, available through the internal USB header- 2 x USB 3.2 Gen 2 Type-A ports (red) on the back panel- 5 x USB 3.2 Gen 1 ports (3 ports on the back panel, 2 ports available through the internal USB header)
- Chipset+2 USB 2.0 Hubs:- 8 x USB 2.0/1.1 ports (4 ports on the back panel, 4 ports available through the internal USB headers)
Internal I/O Connectors
- 1 x 24-pin ATX main power connector- 2 x 8-pin ATX 12V power connectors- 1 x CPU fan header- 1 x water cooling CPU fan header- 3 x system fan headers- 1 x system fan/water cooling pump header- 2 x addressable LED strip headers- 2 x RGB LED strip headers- 4 x M.2 Socket 3 connectors- 6 x SATA 6Gb/s connectors- 1 x front panel header- 1 x front panel audio header- 1 x USB Type-C header, with USB 3.2 Gen 2 support- 1 x USB 3.2 Gen 1 header- 2 x USB 2.0/1.1 headers- 2 x Thunderbolt add-in card connectors- 1 x Trusted Platform Module header (For the GC-TPM2.0 SPI/GC-TPM2.0 SPI 2.0 module only)- 1 x reset button- 1 x Q-Flash Plus button- 1 x Clear CMOS button- 1 x reset jumper- 1 x Clear CMOS jumper
Back Panel Connectors
- 1 x USB Type-C port, with USB 3.2 Gen 2x2 support- 2 x USB 3.2 Gen 2 Type-A ports (red)- 3 x USB 3.2 Gen 1 ports- 4 x USB 2.0/1.1 ports- 2 x SMA antenna connectors (2T2R)- 1 x HDMI 2.0 port- 1 x Displ
Related Products
